Training Safety Integrity Level (SIL) & Layer Of Protection Analysis (LOPA)

Training Safety Integrity Level (SIL) & Layer Of Protection Analysis (LOPA) – Lulusan Teknik Kimia dapat bekerja di Migas sebagai Process Safety Engineer, yang bertugas memastikan semua proses produksi di production/refinery plant berlangsung dengan aman. Merekalah yang mengatur letak (facility layout), mengidenfikasi area bahaya (hazardous area), memeriksa process flow, P&ID, mengkaji loss prevention seperti  fire and explosion analysis, equipment siting, overpressure protection, inherently safer design, dan terakhir kemudahan pengoperasian (operatibility).

Process Safety Engineer berbeda dengan K3/HSE Engineer, dimana HSE lebih menekankan pada behavior safety ,occupational health, industrial hygiene, safety/HSE management system, , operational safety.

Peluang karir Process Safety Engineer sangat luas, tidak saja dibutuhkan di bidang migas, tetapi juga di power plant, petrokimia, food beverage, manufacture dll.

Untuk mengawali karir menjadi Process Safety Engineer, minimal anda menguasai 4 keahlian Hazard evaluation and risk assessment, yaitu :

1. HAZOP : Hazard Anda Operability Study
2. HAZID : Hazard Indentification
3. SIL : Safety Integrity Level
4. LOPA : Layer Of Protection Analysis

Training SIL & LOPA adalah training untuk memberikan kompetensi untuk anda, (terutama lulusan teknik kimia) sebagai modal awal  berkarir sebagai Process Safety Engineer.

Awali karir anda di migas melalui training ini, sebagai bonus, pasca training akan kami berikan data 100 alamat perusahaan migas dan konsultasi perbaikan CV agar lebih menarik bagi perusahaan Migas.

Training Safety Integrity Level (SIL) & Layer Of Protection Analysis (LOPA)

Tujuan Pelatihan Safety Integrity Level (SIL) & Layer Of Protection Analysis (LOPA)

SIL TRAINING OBJECTIVE

On Successful completion of this module the participant will be able to:

• Learn the core concepts of fundamental SIL & application in industry
• Understand how to modify & improve the existing control system without avoiding safety and business aspects.
• Learn how to implement the tools of SIL based upon the IEC and the other standard a basic to control production program
• Be able to measure the reliability of SIS outcome

LOPA TRAINING OBJECTIVE

On Successful completion of this module the participant will be able to:

• How to establish risk acceptance (risk tolerance) criteria for use within your company (this is also called the development of ALARP criteria)
• How to calculate “as-is” risk for a cause-consequence pair: Estimate the frequency of the initiating event and estimate consequence
• What is meant by “independence” and “uniqueness” with respect to IPLs
• How to use LOPA to determine the Safety Integrity Level (SIL) necessary for an instrument IPL (to comply with the requirements of IEC 61508/61511)
• How other companies worldwide use LOPA to:
  • Decide which PHA/HAZOP recommendations to reject and which to accept
  • Focus limited resources within mechanical integrity departments and operations on what is critical to managing risk to ALARP
  • Avoid wasting resources on quantifying risk using QRA methods
  • Perform specialized risk modeling for facility siting questions

Materi Safety Integrity Level (SIL) & Layer Of Protection Analysis (LOPA)

SAFETY INTEGRITY LEVEL (SIL)

• Introduction to Safety Instrumented Systems
• The Safety Lifecycle – IEC61508
• IEC 61511 and the other applicable standards
• Risk Management & Reliability
• Process Hazard Analysis
• Layer of Protection Analysis
• Safety Integrity Level selection
• Probability of Failure Demand
• Hardware Fault Tolerance
• Case Study

LAYER OF PROTECTION ANALYSIS (LOPA)

• Overview of LOPA
• Use of LOPA
• Documentation and Example application
• Selecting scenario, Defining consequences, and Identifying initiating event and Enablers
• Identifying Independent Protection Layers( IPL)
• Use of failure rate data
• Estimating Scenario Risk
• Making Decision
• Worked Examples

Peserta Safety Integrity Level (SIL) & Layer Of Protection Analysis (LOPA)

• Managers – Operations, Safety, and Executive
• Engineers – Process, Safety, Instrument, and Mechanical
• Engineering and technical personnel employed in process industries, power, oil, and gas, being of direct relevance to engineers involved in the provision and operation who work closely and respond to SIS.

Fasilitas Yang Diberikan

• Lokasi Training di Hotel Bintang 3-5
• Ruang Pelatihan Full AC, Toilet, Smoking Area dan Musholla
• Akses Internet Wireless
• Perlengkapan Visual LCD Proyektor, & Whiteboard
• Modul / Handout(Hard Copy & Soft Copy)
• Training Kit (Co-Card, Bolpoin, & Buku Catatan)
• 1x Makan Siang dan 2x Coffee Break (Snack)
  
• Penjemputan Bandara Hotel
• Basement Tempat Parkir Motor dan Mobil yang Aman
• Sertifikat Keikutsertaan Training
• Merchandise menarik dari Duta Pro Training & Consulting
• Konsultasi dengan Instruktur/Narasumber setelah Training

Biaya dan Lokasi Training

• Yogyakarta : Rp 6.800.000,- / Peserta
• Bandung : Rp 7.600.000,- / Peserta
• Jakarta : Rp 7.800.000,- / Peserta
• Surabaya : Rp 7.800.000,- / Peserta
• Malang : Rp 7.800.000,- / Peserta
• Semarang : Rp 7.200.000,- / Peserta
• Solo : Rp 7.500.000,- / Peserta
• Bali : Rp 7.000.000,- / Peserta (Minimal 2 peserta)
• Lombok: Rp 7.400.000,- / Peserta (Minimal 2 peserta)

Keterangan

• Jumlah Peserta memperngaruhi biaya diatas.
• Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
• Jadwal Training dan Lokasi Training dapat menyesuaikan permintaan.
• Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan ini, silakan isi form di Formulir Pendaftaran.